你好,欢迎光临济南诚德包装制作有限公司网站!

服务热线:

0531-88606457

18764166456

内页轮播
内页轮播
内页轮播

产品中心

  1. 方便袋
  2. 连卷袋/撕拉袋/拉链袋
  3. OPP塑料袋
  4. 平口袋/直立袋
  5. 手工异形袋/缩口塑料袋
  6. 扣手袋/手挽袋/服装袋
  7. 罩衣袋
  8. 气垫膜袋
  9. 塑料薄膜
  10. 抗静电塑料袋
当前位置:首页>新闻资讯
印刷胶带脱胶的原因及解决办法
发布于:2023/01/31
印刷胶带是企业走化路线的必然选择,但是印刷胶带虽好,同时也给不少人带来了麻烦的问题,那就是印刷胶带容易脱胶,把印刷胶带粘在纸箱上撕开后,印刷油墨和胶水就粘在纸箱上,只把一层薄膜撕开了,这样就使得纸箱残胶不美观,同时也是会影响印刷胶带的粘性的。那么济南印刷胶带脱胶究竟是什么原因呢?
Printing tape is an inevitable choice for enterprises to take the branding route, but although it is good, it also brings many problems. That is, the printing tape is easy to degumme. After the printing tape is glued to the carton and torn off, the printing ink and glue will stick to the carton, and only one layer of film will be torn off, which makes the residual glue in the carton not beautiful, but also affects the viscosity of the printing tape. So what is the reason for the degumming of Jinan printing tape?
一是油墨品质有问题导致油墨不能附着在bopp薄膜上;二是印刷胶带在上胶后烘干没控制好导致脱胶。那么如何解决印刷胶带脱胶的问题呢?当然就要从印刷胶带脱胶的原因着手了,先要注意印刷油墨的质量,坚决不能用质低价廉的油墨,其次就是要把握好涂胶后烘干的一个程度。
First, the ink quality is poor, which causes the ink to not adhere to the bopp film; Second, the printing tape was not properly dried after gluing, resulting in degumming. So how to solve the problem of printing tape degumming? Of course, we should start with the reason for the degumming of the printing tape. First, we should pay attention to the quality of the printing ink. We should never use high-quality and low-cost ink. Second, we should grasp the degree of drying after gluing.
我们在购买胶带的时候,就应该选择那些品质有保障的厂家,要去有资质的厂家那里购买,去一些小作坊购买的话,容易买到掺有杂质的胶带,这样很容易产生脱胶的现象。我们在放置胶带的时候避免太阳直射,应该放置在阴凉干燥处。为了避免胶带脱胶,只能从源头上杜绝和在存放的时候多注意。
When we buy adhesive tapes, we should choose those manufacturers with guaranteed quality. We should go to qualified manufacturers to buy adhesive tapes. If we go to some small workshops to buy adhesive tapes with impurities, it is easy to buy adhesive tapes mixed with impurities, which is easy to cause degumming. When placing the tape, we should avoid direct sunlight and place it in a cool and dry place. In order to avoid the degumming of the adhesive tape, it can only be stopped at the source and paid more attention when storing.
济南印刷胶带
此外它的保存也要注意多个事项,如:
In addition, it should also pay attention to several matters, such as:
1.我们先要选择阴凉干燥的地方进行储存。
1. We should first choose a cool and dry place for storage.
2.冬天天气干燥我们给室内通通风,注意室内温度不能过低。
2. In dry winter, we should ventilate the room and pay attention to the indoor temperature should not be too low.
3.在使用印刷胶带时如果印刷胶带粘合度不是很好,我们可以用手按压来保证印刷胶带的充分粘合。
3. If the adhesion of the printing tape is not very good when using the printing tape, we can press it by hand to ensure the full adhesion of the printing tape.
4.夏季天气潮湿,我们在这个季节要注意储存温度,不使用的印刷胶带要经常翻动,保证胶带之间不会出现粘结现象。
4. The weather is humid in summer. We should pay attention to the storage temperature in this season. The printing tape that is not used should be turned frequently to ensure that there is no adhesion between the tapes.
以上就是关于印刷胶带脱胶的原因和解决办法的简单介绍,希望对大家有所帮助。本公司http://www.sxsuliao.com对于印刷胶带的生产工艺已经非常熟练及经验丰富,所以一般是不会出现印刷胶带脱胶的现象,朋友们可以放心使用!
The above is a brief introduction to the causes and solutions of the degumming of printing tape, hoping to help you. The Company http://www.sxsuliao.com The production process of printing tape has been very skilled and experienced, so generally there will be no degumming of printing tape. Friends can rest assured to use it!
上一篇:复合袋热封不良的表现及其原因
下一篇:塑料袋在生活中的10种用途
相关产品

珠光膜气泡信封袋

气泡快递袋

服装拉链袋

防震快递袋

相关新闻
质量好的气泡袋主要体现在哪?
平口袋和PE自封骨袋的区别有哪些?
快递袋全新料和半新料的区别
快递袋的生产制作要求
自封袋的质量好坏怎么查看?
CPE磨砂袋制作成服装袋被广泛使用
磨砂拉链袋生产注意事项要注意什么?
自粘袋的生产制造要注意的知识